ELEKTRA 315 HDPE PP PVDF Water Gas Fire Sprinkler Pipe/Tube 220V or 110V Electrofusion Welding Machine

Short Description:

1. Modle :ELEKTRA315

2. Working range: 20-315mm

3. Supply power:  3500W

4.  With Scanner


Product Detail

Application&Certifications

Product Tags

Detail Information

Input Voltage: 110V-230V Power: 4000W
Maximum Output Corrent: 100A Protection Degree: IP 54
Dimensions Carrying Case(WxDxH): 405*285*340mm Weight Machine: 16kg

Product Description

Electrical Welding HDPE PP PP - R Water Gas Fire Sprinkler Tube Machine

Electrical welding machine- ELEKTRA 315Description

ELEKTRA 315 is an universal electrofusion machine,suitable for welding pipe/fittings for the transport of gas, water and for welding fire sprinkler system (HDPE,PP,PP-R,couplings for 8 to 48 V).The Elektra 315 machine is made in compliance with international standard. Composed of:machine body and carring case,intuitive control panel an in built memory with 500 welding cycles,featuring the possiblity of transferring data to a Pc/Laptop and an laser scanner-barcode reading system that allows the automatic setting of the welding parameters.

Stand composition:

1. Universal

2. Laser scanner

3. Pen Drive

4. Manual scraper

On request:

1. Software Ritmo Transger

2. Adapter DB9M-USB

Electrical welding machine- ELEKTRA 315Technical Features

Working range 20-315mm
Power supply 110/230V Sihgle Phase 50/60 Hz
Absorbed power 4000W
Max.output curent 100A
60% Duty Cycle output 60A
Memory capacity 500 report
Protection degree IP 54
Weight machine body ~16 kg (35.5lb)
Dimensions machine body 263×240×300mm;10.3"×9.4"×1.8"
Dimensions transport case 405×285×340mm; 16"×11.2"×13.4"
dwasd
20191126164118_69729

Electrical welding machine- ELEKTRA 315 Packing
Normal export packing:Inner packing is aluminum case, outside is carton

Dimensions:40.5×28.5×34mm

N.W:16kg

G.W:20kg

Electrical welding machine- ELEKTRA 315Applications

Before performing fusions and before connecting to power outlet, check the following:

NOMINAL TENSION AND FREQUENCY : see technical features (page 7)

OUTLETS AND EXTENTION CABLES: they must be suitable for the power absorbed by machine ( see page 7, 10)

CABLES: isolation has to be intact, they have to be placed away from places where vehicles transit and where they can be damaged .

MACHINE BODY: it has to be isolated and placed steadily.

Keep machine and cables clean and dry. Before cleaning operations disconnect machine from power supply. Use a humid soft cloth with water and alcohol (avoid any kind of solvent).

ELEKTRA is an electronic equipment therefore it has to be handled safely avoiding impacts and sudden temperature changes.

To guarantee correct functioning for as long as possible, operators has to perform frequent checks to the following components :

  • Connectors and adapters
  • Power cables and fusion cables
  • Display
  • Mechanical structure (frame, box).

In case of any anomaly machine has to be checked by manufacturer or by an authorized service centre.

In any case machine has to be serviced every 2 years by manufacturer or by an authorized service centre.

 

Before performing fusions and before connecting to power outlet, check the following:

NOMINAL TENSION AND FREQUENCY : see technical features (page 7)

OUTLETS AND EXTENTION CABLES: they must be suitable for the power absorbed by machine ( see page 7, 10)

CABLES: isolation has to be intact, they have to be placed away from places where vehicles transit and where they can be damaged .

MACHINE BODY: it has to be isolated and placed steadily.

Keep machine and cables clean and dry. Before cleaning operations disconnect machine from power supply. Use a humid soft cloth with water and alcohol (avoid any kind of solvent).

ELEKTRA is an electronic equipment therefore it has to be handled safely avoiding impacts and sudden temperature changes.

To guarantee correct functioning for as long as possible, operators has to perform frequent checks to the following components :

  • Connectors and adapters
  • Power cables and fusion cables
  • Display
  • Mechanical structure (frame, box).

In case of any anomaly machine has to be checked by manufacturer or by an authorized service centre.

In any case machine has to be serviced every 2 years by manufacturer or by an authorized service centre.

 


  • Previous:
  • Next:

  • Press button G to turn machine on.

    Machine performs a self testing to check correct functioning.

    If testing is ok display will show what’s on side picture *.

    If testing reveals and error an error code will be displayed

    图片16
    20191125170609_57582
  • Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us