Welcome To CHUANGRONG
PE100 PN16 SDR11/PN10 SDR17 90 Degree ISO Standard, ASTM Standard Butt Fusion Elbow Fittings
Detail Information
CHUANGRONG is a share industry and trade integrated company, established in 2005 which focused on the production of HDPE Pipes, Fittings & Valves, PPR Pipes, Fittings & Valves, PP compression fittings & Valves, and sale of Plastic Pipe Welding machines, Pipe Tools, Pipe Repair Clamp and so on.
HDPE 90 Degree ISO Standard, ASTM Standard Butt Fusion Elbow Fittings
|
Type |
Specification |
Diameter(mm) |
Pressure |
|
HDPE Butt Fusion Fittings |
Reducer |
DN50-1200mm |
SDR17,SDR11, SDR9(90-400mm) |
|
Equal Tee |
DN50-1200mm |
SDR17,SDR11, SDR9(90-400mm) |
|
|
Reducing Tee |
DN50-1200mm |
SDR17,SDR11, SDR9(90-400mm) |
|
|
Lateral Tee(45 deg Y Tee) |
DN63-315mm |
SDR17,SDR11, SDR9(90-400mm) |
|
|
22.5 Deg Elbow |
DN110-1200mm |
SDR17,SDR11, SDR9(90-400mm) |
|
|
30 Deg Elbow |
DN450-1200mm |
SDR17,SDR11, SDR9(90-400mm) |
|
|
45 Deg Elbow |
DN50-1200mm |
SDR17,SDR11, SDR9(90-400mm) |
|
|
90 Deg Elbow |
DN50-1200mm |
SDR17,SDR11, SDR9(90-400mm) |
|
|
Cross Tee |
DN63-1200mm |
SDR17,SDR11, SDR9(90-400mm) |
|
|
Reducing Cross Tee |
DN90-1200mm |
SDR17,SDR11, SDR9(90-400mm) |
|
|
End Cap |
DN20-1200mm |
SDR17,SDR11, SDR9(90-400mm) |
|
|
Stub End |
DN20-1200mm |
SDR17,SDR11, SDR9(90-400mm) |
|
|
Male(Female) Union |
DN20-110mm 1/2'-4' |
SDR17,SDR11 |
Welcome to visit our factory or conduct a third-party audit.
Welcome to contact us for products details and professional service.
Please send email to: chuangrong@cdchuangrong.com
Product Description
1. Butt fusion is the most commonly used fusion method for HDPE pipes, and HDPE butt fusion fittings are the most commonly used fittings for HDPE piping systems.
2. The outer diameter of HDPE buttfusion welded fittings should be exactly the same as the HDPE pipe.
3. Use the HDPE pipe butt welding machine to fuse the two ends at a certain temperature and time, then remove the heating plate and bond the two ends tightly together under a fixed pressure until it cools.
4. All HDPE butt fusion fittings are made of PE100 material, and the specified SDR value pipe must correspond to the same SDR value pipe fitting during welding. It is unacceptable to use a butt fusion joint with a different SDR grade than the pipe.
5. HDPE pipes with the same outer diameter but different specified wall thicknesses,different SDR can butt against each other under special conditions after consulting with the pipe manufacturer .
| Product Name: | Butt Welding Pipe Fitting 90 Degree Elbow | Standard: | EN 12201-3:2011,EN 1555-3:2010, ISO4427,ISO4437 |
|---|---|---|---|
| Material: | PE100 Virgin Raw Material | Material Suppier: | SINOPEC, BASELL, SABIC, BOROUGE Etc |
| Production Process: | Injection Molding | Port: | Ningbo,Shanghai Or As Required |
Specification
| Specifications | L | A |
| φD×90° | MM | MM |
| 50×90° | 120 | 66 |
| 63×90° | 133 | 63 |
| 75×90° | 163 | 70 |
| 90×90° | 182 | 79 |
| 110×90° | 210 | 82 |
| 125×90° | 240 | 87 |
| 140×90° | 241 | 89 |
| 160×90° | 258 | 80 |
| 180×90° | 297 | 105 |
| 200×90° | 308 | 97 |
| 225×90° | 367 | 120 |
| 250×90° | 362 | 100 |
| 280×90° | 423 | 139 |
| 315×90° | 455 | 125 |
| 355×90° | 550 | 155 |
| 400×90° | 610 | 160 |
| 450×90° | 650 | 155 |
| 500×90° | 700 | 155 |
| 560×90° | 780 | 165 |
| 630×90° | 850 | 170 |
| 710×90° | 900 | 170 |
| 800×90° | 990 | 170 |
Workshop
CHUANGRONG and its affiliated companies specialize in the R&D, production, sale and installation of new-type plastic pipes and fittings. It owned five factories, one of the largest manufacturer and supplier of plastic pipes and fittings in China. Furthermore, the company owns more 100 sets pipe production lines that are advanced at domestic and abroad,200 sets of fitting production equipment. The production capacity reaches more than 100 thousand tons. Its main contain 6 systems of water, gas, dredging, mining, irrigation and electricity, more than 20 series and more than 7000 specifications.
Packing
Packaged by cartons woodencase ,or bags.
Application
HDPE pipes have been in existence sicne the mid 50’s . The experience shows tha HDPE pipes is solution to most pipe problems being recogized by clients and engineering consultants as the ideal pipe material for many pressure and non pressure applications from water and gas distrutionto gavity , sewers and surface water drainage for both new & rehabilitation projects.
Application field: Drinking water supply pipe for urban and rural area, liquid transmission pipe in chemical, chemical fiber, food, forestry and metallurgy industry, waste water drainage pipe, mining slurry transmission pipe for mining field.
Certification
CHUANGRONG possesses complete detection methods with all kinds of advanced detection equipment to ensure the quality control in all processes from raw material to finished product. The products are in line with ISO4427/4437, ASTMD3035, EN12201/1555, DIN8074, AS/NIS4130 standard, and approved by ISO9001-2015, CE, BV, SGS, WRAS.
If you have any questions, you can feel free to contact us in anytime .
Welcome to contact us for products details and professional service.
Please send email to: chuangrong@cdchuangrong.com or Tel: + 86-28-84319855
Send your message to us:
Products categories
Social Links
information
Quick Links
contact us
-
ADD:
Room 911, Building T1, The Ring Center, No.333 Dongda Road, Chengdu, China.
- TEL: 0086-18180897627
- EMAIL: chuangrong@cdchuangrong.com
Hot Products - Sitemap - AMP Mobile
Pe Water Pipe, Repair Clamp, Hdpe Pipe And Fitting, Hdpe Pipe Fittings, Male Adaptor, Hdpe Pipe Fitting,
-
Phone
-
E-mail
-
Whatsapp
-
Skype
-
Top
