Welcome To CHUANGRONG

HDPE Ball Valve for Gas Supply PN16 SDR11 PE100 CE Approved

Short Description:

1. Name: PE Gas Ball Valves ( One- Purge Ball Valves ,  Two-Purge Ball Valves)

2. Size : dn32-315mm

3.  Standard : EN15555

4.  PE100  SDR11

 


Product Detail

Product Tags

Detail Information

Product Name: HDPE Ball Valve For Gas Supply PN16 SDR11 PE100 CE Approved Application: Gas,Water,Oil Etc
Specification: 50mm~315mm PE100 PN16 SDR11 Standard: EN 1555-3:2010 EN 12201-3:2011
Port: China Main Port Material: PE100 Virgin Raw Material

Product Description

ProductDescription of Standard HDPE Ball Valve for GAS Supply

Electrofusion HDPE fittings are welded by electrofusion machine to connect HDPE pipes together: Afterelectrofusion welding machine plug in electricity and turn on, The copper wire buried inserted in electric fuse HDPE fittings are heated and make HDPE melt, Which joint HDPE pipe and fittings well.

Specification

20191128160536_87445
20191128160934_32780
20191128161241_67811
Specifications

φdn

 

L

mm

A

mm

H

mm

φd
50 495 90 200 41
63 505 100 200 49
90 660 110 325 70
110 660 115 325 87
160 770 115 420 126
200 785 125 430 158
250 980 140 585 204
315 985 140 585 250

Application

1.Municipal water supply, gas supply and agriculture etc.2.Commercial & Residential water supply3.Industrial liquids transportation4.Sewage treatment5. Food and chemical industry7. Replacement of cement pipes and steel pipes8. Argillaceous silt, mud transportation9. Garden green pipe networks.

1250603864172937217

Factory Test report

est item Standard Conditions Results Unit
1.Melt Flow Index ISO1133 190°C & 5.0Kg 0.2-0.7 0.49 g/10min
2.Density ISO1183 @23°C ≥0.95 0.960 g/cm3
3.Oxidation Induction Time ISO11357 210°C >20 39 Min
4. Hydrostatic Pressure Test ISO1167 80°C 165h, 5.4Mpa Passed
5 Size Check ISO3126 23°C Passed
6 Appearance Clean& Smooth 23°C Passed
  • The results according to test 1-3 are taken form the PE raw material supplier’s report.
  • The results according to test 4-6 are taken from the internal test results of fittings sampled from the
  • same batch as delivered fittings.
  • Marking according EN 12201 – 3 and EN 1555 – 3.
  • The pass/fail criteria are based on the requirements of the UNI EN 12201 and UNI EN 1555 standards.

Workshop

IMG_5607
IMG_2636

Certifications

ISO4427

Application

20191127203914_51601

  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us