China Quick Connector PP Plumbing Fittings Plastic End Cap Aaptor For Water Supply Manufacture and Factory

Quick Connector PP Plumbing Fittings Plastic End Cap Aaptor For Water Supply

Short Description:

1. Name: End Plug

2. Size: dn20-110mm

Send email to us

Product Detail

Product Tags

Detail Information

Technics:	Injection Molding	Connection:	Female
Product Name:	Pp Female Adaptor	Application:	Water Supply,irrigation
Color:	Blue,black Or As Requirement	Package:	Carton Box+plastic Bag

Product Description

Quick Connector PP Plumbing Fittings Plastic End Cap Aaptor For Water Supply

Material Detailed

Part	Material	Colour
Body	Polypropylene block copolymer(PP-B) of exceptional mechanical properties event at high temperature	black
Nut	Polypropylene with dye master of high stablility to UV rays andsolidity to heat	blue
Clinching ring	Polyacetal resin with high mechanical resistance and hardness	white
Blocking bush	Polypropylene	black
O Ring gasket	Special elastomeric acrylinitrile rubber(NBR)for alimentary use	black
Reinforcing ring	Stainless steel for female threads for 1-1/4″ to 4″

Operate Temperature

Operating T[℃]	20℃	25℃	30℃	35℃	40℃	45℃
PFA[bar]	16	14.9	13.9	12.8	11.8	10.8
PFA[bar]	10	9.3	8.7	8	7.4	6.7

Specification

D	g.w.	n.w.	CTN
20	13.44	12.74	260
25	11.99	11.29	166
32	11.62	10.92	120
40	10.93	10.23	66
50	12.76	12.06	45
63	9.94	9.24	20
75	9.82	9.12	16
90	12.16	11.46	12
110	22.18	21.48	12

Assembly Instruction

A Chamfer the pipe with beveler tool

B Slackend the ring nut with out removing from the body check that O-ring and clip ring are in proper position.

C Insert the pipe end with out tightening the ring nut.Push the fitting until the pipe oversteps the O-ring and reaches the stop

D Hand tighten the ring unt the tighten further with a strap/chain wrench.

D75-110mm recommended

A After preparing pipe ends unscrew the fitting.Then remove all internal components:the ring nut,the clip ring,the packing presser bush and the O-ringB Push the pipe into the fittings until it reaches the slop.Insert the O-ring and position the same by inserting the packing-pressure bushC Displace the clip ring onto the pipe as shown in picture C.D Slide the ring nut over the clip ring and tighten with a strap/chain wrench in order to complete the assembly.